Epoxy coatings · Yakima + 60 miles
Epoxy floors for the hardest-working concrete on your property
Garage, shop and utility floors ground, repaired and coated in solid colour, flake or metallic. Park on it after about 72 hours.
Chapter 01
Why bare concrete and cheap floor paint give out
A bare garage slab soaks up oil, sheds dust and stains under the first car that leaks. Thin floor paint sitting on top of unprepared concrete looks fine for a season, then lifts in sheets where the tires turn and park.
Almost every failed floor fails for the same reason: the coating was never really attached to the slab. Concrete holds grease and fine laitance on its surface, and a coating applied over that has nothing solid to grip.
A garage, shop, basement or utility room is hard use. The coating has to take weight, spills, tools dropped on it and the weekly hose-down, so the work happens under the epoxy, not in it.
A grey flake epoxy garage floor with a glossy clear topcoat
How the floor is built, from slab to topcoat
We begin with a concrete assessment, then clean and degrease the whole floor. Cracks and imperfections are repaired, and the surface is ground and prepared so the epoxy can bond to clean, open concrete instead of sitting on a skin of dirt.
Then the epoxy goes down, in solid colors, color flake blends or metallic finishes, whichever you choose. A protective clear topcoat finishes it and gives the floor its wipe-clean surface.
Planning matters as much as application. We cover timelines and materials up front, protect everything around the slab, and walk the finished floor with you. Call Ramon's crew on (509) 910-1408 to set up the estimate.
Chapter 03
Curing time, care, and how long the floor should last
Light foot traffic is usually fine within 24 hours. Park a vehicle on it only after the full 72 hours of curing. That wait is the cheapest insurance the floor has, so plan your week around it.
Professionally applied epoxy can last 10-20 years or more with proper care and maintenance. Sweep up grit, wipe spills when they happen, and a gloss topcoat will stay easy to clean for years.
You will know a floor is due for attention when the gloss goes flat in the wheel tracks or a chip opens down to bare concrete. A small repair then keeps moisture and oil from working underneath.
4.8 stars from 107 Google reviews. Licensed, bonded and insured, WA L&I contractor CASTICP808NG.
Asked about epoxy
Lifespan, curing and finishes
Want a second opinion on your slab? Call (509) 910-1408.
What the floor job covers
Seven steps from bare slab to topcoat
The grinding and repair are the part you will never see once the floor is down, and they decide whether it is still flat and bonded in ten years.
- Concrete assessment
- Cleaning and degreasing
- Crack and imperfection repair
- Surface grinding and preparation
- Epoxy application
- Optional color flake or metallic finish
- Protective clear topcoat
Ideal spaces
- Garages
- Workshops
- Utility rooms
- Basements
- Storage areas
- Concrete patios
Planning more than the floor? Our crew also handles exterior painting and you can read what customers wrote on Google.
Other work around the property
Let us look at your floor before you decide
The estimate is free and there is no obligation. First-time customers get a discount, and active military and veterans do too.